專注于進口歐、美、日、韓 機電設備儀器儀表 ，始于2008年
熱門搜索：
原裝進口SIEMENS交流電機，HATZ發動機，Europress，美國VORTEC渦流管，英國ROTORY POWER液壓馬達，美國BOSCH葉片泵 ，AQUAMETRO流量計，CEMA 開關、CEMA按鈕，瑞士ABB 進口電機，瑞士CONTOIL流量計，CONTROL TECHNIQUES 伺服電機，EMERSON伺服電機，NIDEC伺服電機，意大利AEG 電機， Marelli Motori電機， LERORY SOEMR電機 等等
產品詳情
簡單介紹：
德國KSB閥門、 KSB截止閥、 KSB循環泵、KSB過濾器、KSB熱油泵浦EN 558-1/1 ISO 5752/1、KSB熱油循環泵、KSB波紋管密封截止閥
詳情介紹：
德國ksb閥門、 KSB截止閥、 KSB循環泵、KSB過濾器、KSB熱油泵浦、KSB泵浦、 KSB機械軸封、 KSB熱媒循環泵
我司供應德國KSB公司全系列產品，有KSB熱油循環泵、KSB波紋管密封截止閥、 KSB過濾器等；產品廣泛運用于食品、化工、紡織、塑膠、電子、木業、鍋爐、**、電廠等行業，特別在聚酯行業、塑膠行業、化工行業、造紙行業、印染等運用很廣。
深圳市卡普特機電設備有限公司優價供應德國KSB工業的全系例產品。 如有任何德國KSB閥門、 KSB截止閥、 KSB循環泵、KSB過濾器、KSB熱油泵浦需求，歡迎隨時咨詢！
電話：0755-21513506 傳真：0755-21513515 郵箱：sales@ttcie.com 聯系人：銷售部
| KSB CHTA、 CHTB CHTC 、CHTD 、YNK YNKN MBH 、NLT | KSB NW、ISKM、ZL、HL、RPK |
| KSB SEZ SNZ、HGA.HGB.HGC、PHZ、PNT.PHT、OMEGA RDL | KSB HPK HPKY、HPH、CPK、CPKH、AMAREX KRT |
| AMAMIX AMAPROP、 MF.MN、AMACAN S、AMACAN P、LC | 德國KSB凱士比PNZ泵 KSB PNZ |
| 德國KSB凱士比PHZ泵 KSB PHZ | KSB PNZ Type of bearing Rolling element and plain bearings |
| KSB PHZ Type of bearing Rolling element and plain bearings | Casing partition Radially split |
| Casing partition Radially split | Drive frequency 50 Hz /60 Hz |
| Drive frequency 50 Hz /60 Hz | Type of drive Electric motor |
| Type of drive Electric motor | Drive voltage Low voltage, high voltage |
| Drive voltage Low voltage, high voltage | No. of impeller entries Single entry |
| No. of impeller entries Single entry | Type of installation Long-coupled |
| Type of installation Long-coupled | Type of coupling Direct;Gear |
| Type of coupling Gear;Direct | Type of lubrication Oil / Pressurized oil lubrication |
| KSB PHZ Type of lubrication Oil / Pressurized oil lubrication | Max. permissible fluid temperature 80 °C |
| Max. permissible fluid temperature 80 °C | Maximum rated pressure (discharge) PN 6; PN 9 |
| Maximum rated pressure (discharge) PN 6; PN 9 | Pump set location Wet well |
| Pump set location Dry installed;Wet well | Suction characteristics Non-priming |
| Suction characteristics Non-priming | Type of casing Tubular casing |
| Type of casing Tubular casing | KSB PNZ Type of impeller Axial;Propeller |
| Type of impeller Mixed flow impeller;Propeller | Type of connection Flange |
| Type of connection Flange | UNSPSC classification 4015150300 |
| UNSPSC classification 4015150300 | eClass assignment 36410000;36410106;36410100 |
| eClass assignment 36410000;36410106;36410100 | Maximum head 15,00 m |
| Maximum head 25,00 m | Minimum head 7,00 m |
| Minimum head 12,00 m | Installation position Vertical |
| Installation position Vertical | Shaft seal type Gland packing;Mechanical seal |
| Shaft seal type Mechanical seal;Gland packing | Main applications Waste water / sewage;Energy;Water |
| Main applications Energy | Casing material Carbon steel;Duplex steel;Chrome nickel steel |
| Casing material Duplex steel;Chrome nickel steel;Carbon steel | Type of installation Stationary |
| Type of installation Stationary | Maximum flow rate 65.000 m³/h |
| Maximum flow rate 65.000 m³/h | Minimum flow rate 5.000 m³/h |
| Minimum flow rate 5.000 m³/h | Maximum speed of rotation 990 1/min KSB PNZ |
| Maximum speed of rotation 990 1/min KSB PHZ | 德國KSB凱士比SEZ泵 KSB SEZ |
| 德國KSB凱士比PNW泵 KSB PNW | KSB SEZ Type of bearing Rolling element and plain bearings |
| Type of bearing Plain bearings | KSB SEZ Casing partition Radially split |
| KSB PNW Casing partition Radially split | Drive frequency 50 Hz /60 Hz |
| Drive frequency 50 Hz /60 Hz | KSB SEZ Type of drive Electric motor |
| Type of drive Electric motor | Drive voltage Low voltage, high voltage |
| Drive voltage Low voltage | No. of impeller entries Single entry |
| No. of impeller entries Single entry | Type of installation Long-coupled |
| Type of installation Long-coupled | Type of coupling Gear;Direct |
| Type of coupling Direct | Type of lubrication Oil / Pressurized oil lubrication |
| Type of lubrication Oil / Product lubrication | Max. permissible fluid temperature 40 °C |
| Max. permissible fluid temperature 60 °C | Maximum rated pressure (discharge) PN 6; PN 9 |
| Maximum rated pressure (discharge) PN 10 | Pump set location Dry installed;Wet well |
| Pump set location Wet well | Suction characteristics Non-priming |
| Suction characteristics Non-priming | Type of casing Tubular casing |
| Type of casing Tubular casing | Type of impeller Mixed flow impeller;Open |
| Type of impeller Axial;Propeller | Type of connection Flange |
| Type of connection Flange | eClass assignment 36410100;36410000;36410106 |
| eClass assignment 36410000;36410106;36410100 | Maximum head 33,00 m |
| Free passage 170 mm | Minimum head 7,00 m |
| Maximum head 10,00 m | Installation position Vertical |
| Minimum head 0,50 m | Shaft seal type Mechanical seal;Gland packing |
| Installation position Vertical | Main applications Energy;Water;Industry and process engineering |
| Shaft seal type Gland packing | Casing material Carbon steel;Chrome nickel steel;Duplex steel |
| Main applications Waste water / sewage;Water | Maximum discharge-side pressure 9 bar |
| Casing material Ni-Resist;Chrome nickel steel;Carbon steel | Maximum drive rating 5.000 kW |
| Maximum drive rating 320 kW | Type of installation Stationary |
| Type of installation Stationary | Maximum flow rate 65.000 m³/h |
| Maximum flow rate 9.000 m³/h | Minimum flow rate 5.000 m³/h |
| Minimum flow rate 290 m³/h | Maximum speed of rotation 990 1/min KSB SEZ |
| Maximum speed of rotation 1.500 1/min KSB PNW | 德國KSB凱士比SNW泵 KSB SNW |
| 德國KSB凱士比SEZT泵 KSB SEZT | KSB SNW Type of bearing Plain bearings |
| KSB SEZT Type of bearing Plain bearings | Casing partition Radially split |
| Casing partition Radially split | Drive frequency 50 Hz /60 Hz |
| Drive frequency 50 Hz /60 Hz | Type of drive Electric motor |
| Type of drive Electric motor | Drive voltage Low voltage, high voltage |
| Drive voltage Low voltage, high voltage | No. of impeller entries Single entry |
| Type of installation Long-coupled | Type of installation Long-coupled |
| Type of coupling Direct | Type of coupling Direct |
| KSB SEZT Type of lubrication Oil / Pressurized oil lubrication | Type of lubrication Oil / Product lubrication |
| Max. permissible fluid temperature 45 °C | Max. permissible fluid temperature 60 °C |
| Nozzle position Side-side | Guaranteed to be silicon-free Yes |
| Maximum rated pressure (discharge) PN 6; PN 10; PN 16 | Maximum rated pressure (discharge) PN 6; PN 10 |
| Pump set location Wet well | Pump set location Wet well |
| Suction characteristics Non-priming | Suction characteristics Non-priming |
| Type of casing Tubular casing | Suitable for drinking water Yes |
| Type of impeller Open | Type of casing Tubular casing |
| Type of connection Flange | Type of impeller Closed;Open;Mixed flow impeller |
| eClass assignment 36410106;36410101;36410000 | Type of connection Flange |
| Maximum head 110,00 m | eClass assignment 36410100;36410106;36410000 |
| Minimum head 7,00 m | Maximum head 60,00 m |
| Installation position Vertical | Minimum head 5,00 m |
| Shaft seal type Mechanical seal;Gland packing | Installation position Vertical |
| Main applications Water | Shaft seal type Gland packing |
| Casing material Duplex steel;Cast duplex steel | Main applications Water;Energy |
| Maximum discharge-side pressure 16 bar | Casing material Chrome nickel steel;Carbon steel;Duplex steel |
| Maximum drive rating 7.500 kW | Maximum discharge-side pressure 10 bar |
| Type of installation Stationary | Maximum drive rating 800 kW |
| Maximum flow rate 20.000 m³/h | Type of installation Stationary |
| Minimum flow rate 1.200 m³/h | Maximum flow rate 6.500 m³/h |
| Maximum speed of rotation 990 1/min KSB SEZT | Minimum flow rate 720 m³/h |
| Maximum speed of rotation 1.500 1/min KSB SNW | |
| KSB CHTA、 CHTB CHTC 、CHTD 、YNK YNKN MBH 、NLT | KSB HPK HPKY、HPH、CPK、CPKH、AMAREX KRT |
| KSB SEZ SNZ、HGA.HGB.HGC、PHZ、PNT.PHT、OMEGA RDL | KSB AMAMIX AMAPROP、 MF.MN、AMACAN S、AMACAN P、LC |
| KSB NW、ISKM、ZL、HL、RPK | |
| Casing partition Radially split | Type of bearing Plain bearings |
| Drive IEC standardized motor | Casing partition Radially split |
| Drive frequency 50 Hz /60 Hz | Drive IEC standardized motor |
| Type of drive Electric motor | Drive frequency 50 Hz /60 Hz |
| Drive voltage Low voltage | Type of drive Electric motor |
| Connection to power supply 220/400/690 V, 3~ | Drive voltage Low voltage |
| Explosion protection II 2 G EEX DE IIC T4;II 2 G EEX DE IIC T5;II 2 G EEX DE IIC T3;II 2 G EEX DE IIC T6 | Connection to power supply 220/400/690 V, 3~ |
| No. of impeller entries Single entry | No. of impeller entries Single entry |
| Heatable Yes | Impeller material (EN standard) JL1040;JS1025 |
| Impeller material (EN standard) 1.4408;JL 1040;NORIDUR 1.4593 | Type of installation Close-coupled |
| Type of installation Long-coupled | Type of coupling Direct |
| Type of coupling None;Direct | Type of lubrication Oil / Product lubrication |
| Type of lubrication Oil / Product lubrication | Max. permissible fluid temperature 140 °C |
| Max. permissible fluid temperature 350 °C | Nozzle position End suction |
| Nozzle position End suction | Maximum rated pressure (discharge) PN 16 |
| Maximum rated pressure (discharge) PN 25 | Pull-out design Yes |
| Pull-out design Yes | Pump set location Dry installed |
| Pump set location Dry installed | Shaft material (EN standard) 1.4021 |
| Shaft material (EN standard) 1.4462 | Suction characteristics Non-priming |
| Suction characteristics Non-priming | Type of casing Volute casing |
| Type of casing Volute casing | Type of impeller Multi-vane impeller;Closed;Closed / Radial;Radial |
| Type of impeller Radial;Closed / Radial;Multi-vane impeller;Closed | Type of connection Flange |
| Type of connection Flange | Casing material (EN standard) JS1025;JL1040 |
| Casing material (EN standard) NORIDUR 1.4593;1.4408;GP240GH;JS 1025 | eClass assignment 36410100;36410101;36410000 |
| eClass assignment 36410101;36410000;36410100 | Maximum head 100,00 m |
| Free passage 0 | KSB Minimum head 9,00 m |
| Maximum head 220,00 m | Installation position Horizontal or vertical |
| Minimum head 14,00 m | Shaft seal type Canned motor pump |
| Installation position Horizontal | Main applications Industry and process engineering |
| Shaft seal type Canned motor pump | Casing material Cast iron;Nodular cast iron |
| Main applications Industry and process engineering | Maximum discharge-side pressure 16 bar |
| Casing material Cast steel;Cast iron;Cast stainless steel | Maximum drive rating 18 kW |
| Maximum discharge-side pressure 25 bar | Type of installation Stationary |
| Maximum drive rating 70 kW | Maximum flow rate 250 m³/h |
| Type of installation Stationary | Minimum flow rate 3 m³/h |
| Maximum flow rate 300 m³/h | Maximum speed of rotation 3.500 1/min |
| Minimum flow rate 1 m³/h | Type of bearing Ball and plain bearings |
| Maximum speed of rotation 3.500 1/min | Casing partition Radially split |
| KSB Type of bearing Plain bearings | Drive frequency 50 Hz /60 Hz |
| Casing partition Radially split | Type of drive Electric motor |
| KSB Drive Electric motor | Drive voltage Low voltage |
| Drive frequency 50 Hz /60 Hz | No. of impeller entries Single entry |
| Type of drive Electric motor | Heatable Yes |
| Drive voltage Low voltage | Impeller material (EN standard) JS 1025;JL 1040;NORIDUR 1.4593;1.4408 |
| Connection to power supply 220/400/690 V, 3~ | Type of installation Long-coupled |
| No. of impeller entries Single entry | KSB Type of coupling Direct |
| Impeller material (EN standard) JL1040;JS1025 | Type of lubrication Oil / Product lubrication |
| Type of installation In-line | Max. permissible fluid temperature 300 °C |
| Type of coupling None;Direct | Nozzle position End suction |
| Type of lubrication Oil / Product lubrication | Maximum rated pressure (discharge) PN 25 |
| Max. permissible fluid temperature 140 °C | Pull-out design Yes |
| Nozzle position In-line | Pump set location Dry installed |
| Maximum rated pressure (discharge) PN 16 | Shaft material (EN standard) C45+N;1.4462 |
| Pull-out design Yes | Suction characteristics Non-priming |
| Pump set location Dry installed | Type of casing Volute casing |
| Shaft material (EN standard) 1.4021 | Type of impeller Multi-vane impeller;Closed;Closed / Radial;Radial |
| Suction characteristics Non-priming | Type of connection Flange |
| Type of casing Volute casing | Casing material (EN standard) JS 1025;GP240GH+N;1.4408;NORIDUR 1.4593 |
| Type of impeller Closed;Multi-vane impeller;Closed / Radial;Radial | eClass assignment 36410101;36410100;36410000 |
| Type of connection Flange | Free passage 0 |
| Casing material (EN standard) JL1040;JS1025 | Maximum head 225,00 m |
| eClass assignment 36410100;36410101;36410000 | Minimum head 3,50 m |
| Free passage 0 | Installation position Horizontal |
| KSB Maximum head 100,00 m | Shaft seal type Magnetic drive |
| Minimum head 9,00 m | Main applications Industry and process engineering;Energy |
| Installation position Horizontal or vertical | Casing material Cast stainless steel;Special KSB material;Cast steel;Cast iron;Nodular cast iron |
| Shaft seal type Canned motor pump | Maximum discharge-side pressure 25 bar |
| Main applications Industry and process engineering | Maximum drive rating 160 kW |
| Casing material Cast iron;Nodular cast iron | Type of installation Stationary |
| Maximum discharge-side pressure 16 bar | Maximum flow rate 1.400 m³/h |
| Maximum drive rating 22 kW | KSB Minimum flow rate 1 m³/h |
| Type of installation Stationary | Maximum speed of rotation 3.500 1/min |
| Maximum flow rate 180 m³/h | KSB CHTA、 CHTB CHTC 、CHTD 、YNK YNKN MBH 、NLT |
| Minimum flow rate 3 m³/h | KSB SEZ SNZ、HGA.HGB.HGC、PHZ、PNT.PHT、OMEGA RDL |
| Maximum speed of rotation 3.500 1/min | KSB NW、ISKM、ZL、HL、RPK |
| KSB AMAMIX AMAPROP、 MF.MN、AMACAN S、AMACAN P、LC | KSB HPK HPKY、HPH、CPK、CPKH、AMAREX KRT |
?
