SSP pumps ，SSP泵擁有悠久的歷史，可以追溯到成立在英國 伊斯特本的Howard Pump Company，當時
Howard Pump Company提出凸輪轉子泵的設計概念， 并在1940年戰后期間向市場推出**款SSP pumps
SSP泵。 1958年Howard Pump Company公司的前雇員離開公司并創辦了不銹鋼泵有限公司，并**發展了
不銹鋼凸輪轉子泵設計的概念。當泵的材料開始采用不銹鋼材料后，公司更名為SSP Pumps Ltd。 在1987年
SSP Pumps 公司被 Alfa Laval集團收購。不銹鋼齒輪泵應用于全球各地的工業制造企業，廣泛應用在化工、食品、
制藥、**和其他相關工業制造企業。處理從低到高粘度介質如：有機固體懸浮藥劑及藥品中間體、乳霜潔面乳洗發膏等、
凝膠果膠明膠等乳狀液混合物產品制造流程。
使用特點
效率高、能耗低、緊湊的按裝尺寸、連續運作力強、運轉順暢、可逆運行、低剪切泵、*小泵吸介質
衛生設計、維修方便、EHEDG認證、ATEX認可 

SSP泵，  SSP pumps 產品，

S系列凸輪轉子泵，齒輪泵 Series S ， SSP泵  SSP pumps

SSP Series S stainless steel rotary lobe pumps operate at the heart of industries worldwide,
fulfilling a wide range of application requirements throughout Chemical, Food, Pharmaceutical
and other related industries
Handling from low to high viscosity pumped media the characteristic smooth, low shear pumping
action is ideal for delicate media and where organic solids in suspension, creams, froths, gels,
emulsions and mixtures are to be pumped. Series S pumps are suitable for CIP (Cleaning In Place)
and SIP (Sterilisation In Place) and conform to USA 3A Sanitary Standard. In addition,
the Series S pump range is EHEDG accredited for the highest level of cleanability and is ATEX certified.

The Series S pump range has twelve pump head displacements ranging from 0.053 litres/rev to 3.53 litres/rev.
    
? Flow rates up to 106 m3/h
? Differential pressures up to 20 bar
? Port sizes from 25mm to 150mm
流量可達106米3/小時·壓力：20bar口徑：25 - 150毫米
·溫度高達200°C
·EHEDG, 3A, FDA, Ex
S1-0005-H08
S1-0008-H05
S2-0013-H10
S2-0013-H15
S2-0018-H07
S2-0018-H10
S3-0027-H10
S3-0027-H15
S3-0038-H07
S3-0038-H10
S4-0055-H10
S4-0055-H20
S4-0079-H07
S4-0079-H15
S5-0116-H10
S5-0116-H20
S5-0168-H07
S5-0168-H15
S6-0260-H10
S6-0260-H20
S6-0353-H07
S6-0353-H15

S1-0005-V08
S1-0008-V05
S2-0013-V10
S2-0013-V15
S2-0018-V07
S2-0018-V10
S3-0027-V10
S3-0027-V15
S3-0038-V07
S3-0038-V10
S4-0055-V10
S4-0055-V20
S4-0079-V07
S4-0079-V15
S5-0116-V10
S5-0116-V20
S5-0168-V07
S5-0168-V15
S6-0260-V10
S6-0260-V20
S6-0353-V07
S6-0353-V15
X系列凸輪轉子泵，齒輪泵 Series X   SSP泵，  SSP pumps 產品
流量可達115米3/小時壓力：15bar口徑：25 - 150毫米
SSP Series X stainless steel rotary lobe pumps provide the ultimate solution for the Pharmaceutical,
Biotechnology, Fine Chemical and Speciality Food industries where product integrity and cleanability
are paramount.
The optimized pump head geometry and characteristic multi-lobe rotors ensures low-shear operation with
 minimum pulsation, making the pump ideal for gentle transfer of delicate and sensitive media.
Series X pumps are EHEDG certified as fully CIP cleanable to their protocol. In addition,
the Series X pump range conforms to USA 3A Sanitary Standard and is ATEX certified
The Series X pump range has twelve pump head displacements ranging from 0.05 litres/rev to 3.80 litres/rev.
  
? Flow rates up to 115 m3/h
? Differential pressures up to 15 bar
? Port sizes from 25mm to 150mm

X1-0005-U06
X1-0005-U12
X1-0007-U07
X2-0013-U05
X2-0013-U15
X2-0018-U07
X3-0027-U05
X3-0027-U15
X3-0035-U07
X4-0046-U05
X4-0046-U15
X4-0063-U05
X4-0063-U10
X5-0082-V15
X5-0115-V10
X6-0140-V15
X6-0190-V10
X7-0250-V15
X7-0380-V10

L系列凸輪轉子泵，齒輪泵 Series L，   SSP泵，  SSP pumps 產品
SSP Series L stainless steel rotary lobe pumps provide the simple solution to many processes,
fulfilling a wide range of application requirements throughout various industries worldwide.
Handling from low to high viscosity pumped media the characteristic smooth, low shear pumping
action is ideal for delicate media and where organic solids in suspension, creams, froths, gels,
emulsions and mixtures are to be pumped.
Series L pumps are suitable for CIP (Cleaning In Place) and conform to USA 3A Sanitary Standard.
In addition, the Series L pump range is EHEDG accredited for the highest level of cleanability.

The Series L pump range has six pump head displacements ranging from 0.17 litres/rev to 0.82 litres/rev.
 
  
? Flow rates up to 48 m3/h
? Differential pressures up to 8 bar
? Port sizes from 40mm to 80mm
L2 - 0017
L2 - 0021
L3 - 0032
L3 - 0040
L4 - 0064
L4 - 0082
L2-0017
L2-0021
L3-0032
L3-0040
L4-0064
L4-0082

M系列凸輪轉子泵，齒輪泵 Series M，SSP泵， SSP pumps 產品
SSP Series M stainless steel gear pumps are designed for low volume fluid transfer duties for application
areas such as filling machines, dosing and sampling, throughout Chemical, Food, Pharmaceutical and other
related industries.
Stainless steel and PTFE components combined in a traditional gear pump construction provide easy cleaning
and simple maintenance.

The Series M pump range has three pump head sizes.
  
 
? Flow rates up to 1500 l/h
? Differential pressures up to 7 bar
M2-000S-H07
M2-000M-H07
M2-000L-H04

N系列凸輪轉子泵，齒輪泵 Series N， SSP泵， SSP pumps 產品
流量可達2300 l /小時壓力：7bar口徑：6 - 25毫米
SSP Series N stainless steel rotary lobe pumps are designed for low volume fluid transfer duties within
application areas such as laboratories, pilot plants, chemical processing, food processing, electroplating
and film processing.
Series N pumps are highly compact, ideal for installations where space is restricted. The Series N pump
offers users both very low energy consumption and easy maintenance

The Series N pump range has two pump head displacements, 2.05 litres/100 rev and 3.86 litres/100 rev.
  
? Flow rates up to 2300 l/h
? Differential pressures up to 7 bar
? Port sizes from from 1/4 in (6 mm) to 1 in (25 mm)
N1-000S-H05
N1-000S-H07
N1-000L-H05
N1-000L-H07

D系列凸輪轉子泵，齒輪泵 Series D，  SSP泵，  SSP pumps 產品
流量可達180米3/小時壓力：15bar口徑：80 - 150毫米
SSP Series D ductile iron rotary lobe pumps fulfill positive transfer duties throughout industry
where the use of stainless steel for pump head components is not essential, within application
areas such as Petrochemicals, Chemical, Paper, Paints and Polymers, Petfood, Chocolate, Sugar and
Environmental / Industrial Waste Treatment.
The Series D in standard specification has its pump casing and tri-lobe rotors manufactured from
ductile iron for non-sludge applications. For sludge duties the tri-lobe rotors have a metal insert
covered with either NBR or urethane, both giving long term wear resistance. The urethane rotors can
be supplied slotted, providing grit channels to improve rotor life.

The Series D pump range has nine pump head displacements ranging from 0.79 litres/rev to 6.00 litres/rev.
  
? Flow rates up to 180 m3/h
? Differential pressures up to 15 bar
? Port sizes from 800mm to 150mm
D4-0079-H15
D4-0095-H10
D4-0095-H05
D4-0140-H05
D5-0168-H15
D5-0200-H10
D5-0200-H05
D5-0290-H05
D6-0353-H15
D6-0420-H10
D6-0420-H05
D6-0600-H05

A系列凸輪轉子泵，齒輪泵 Series A，  SSP泵，  SSP pumps 產品
流量可達680米3/小時壓力：10bar口徑：150 - 300毫米
SSP Series A stainless steel rotary lobe pumps are designed for high volume fluid transfer duties and
are amongst the world’s largest pumps of this type
Series A pumps are engineered to order, customised to suit application requirements throughout Chemical,
Food and Pharmaceutical processes.

The Series A pump range has five pump head displacements ranging from 550 litres/100 rev to 2270 litres/100 rev.
  
? Flow rates up to 680 m3/h
? Differential pressures up to 10 bar
? Port sizes from 150mm to 300mm
A7-0550-H07
A8-0745-H10
A8-1149-H03
A9-1507-H10
A9-2270-H10

G系列凸輪轉子泵，齒輪泵 Series G，  SSP泵，  SSP pumps 產品
流量可達680米3/小時壓力：10bar口徑：150 - 300毫米
SSP Series G stainless steel rotary lobe pumps are designed for high volume fluid transfer duties and
are amongst the world’s largest pumps of this type
Series A pumps are engineered to order, customised to suit application requirements throughout Chemical,
Food and Pharmaceutical processes.

The Series G pump range has five pump head displacements ranging from 550 litres/100 rev to 2270 litres/100 rev.
  
Flow rates up to 680 m3/h
Differential pressures up to 10 bar

Port sizes from 150mm to 300mm
G7-0550-H07
G8-0745-H10
G8-1149-H03
G9-1507-H10
G9-2270-H10

單盤系列泵 Single Disc，  SSP泵，  SSP pumps 產品
流量可達24米3/小時壓力：1.5bar
SSP Single Disc pumps are designed for use within effluent processes for pumping sludges and other waste media
having entrained solids.
Single Disc pumps have a glandless disc design providing indefinite dry running capability. This design
together with its robust construction and cost effective easy maintenance, provides a mechanically simple
but highly effective solution to waste transfer duties with unparalleled tolerance of problem solids including
rag, fibrous matter and grit.

  Flow rates up to 24 m3/h
  Differential pressures up to 1.5 bar
  Sludge thickness content up to 6%

雙盤系列泵 Dual Disc，  SSP泵，  SSP pumps 產品   
流量可達52米3/小時壓力：3bar
SSP Dual Disc pumps are designed for use within effluent and industrial treatment processes where arduous duties
 in harsh conditions exist.
Dual Disc pumps have a glandless disc design providing indefinite dry running capability. This design results in
 good self-priming performance and unparalleled tolerance of problem solids including rag, fibrous matter and grit.

 Flow rates up to 52 m3/h
 Differential pressures up to 3 bar 
  Sludge thickness content up to 10%
DD50
DD75PS
DD100PSSSP泵  SSP PUMPSSSP泵  SSP PUMPSSSP泵  SSP PUMPSSSP泵  SSP PUMPSSSP泵  SSP PUMPSSSP泵  SSP PUMPSSSP泵  SSP PUMPS